low cost diffused junction low leakage low forward voltage polarity: color band denotes cathode weight: 0.012 ounces,0.34 grams mounting pos ition: any ratings at 25 ambient temperature unless otherwise specified. single phase,half wave,60 hz,resistive or inductive load. for capacitive load,derate by 20%. egp 10c egp 10d units maximum recurrent peak reverse voltage v rrm 150 200 v max imu m rms v o lta g e v rms 105 140 v maximum dc blocking voltage v dc 150 200 v maximum average f orw ard rectif ied current 9.5mm lead length @t a =75 peak forw ard surge current 8.3ms single half -sine-w ave superimposed on rated load @t j =125 maximum instantaneous f orw ard voltage @ 1.0 a v f v maximum reverse current @t a =25 at rated dc blocking voltage @t a =125 maximum reverse recovery time (note1) t rr ns typical junction capacitance (note2) c j pf typical thermal resistance (note3) r ja <d operating junction temperature range t j storage temperature range t stg case:jedec do--41,molded plastic easily cleaned with alcohol,isopropanol and s imilar s olvents high current capability the plastic material carries u/l recognition 94v-0 egp 10b a i f(av) 1.0 300 do - 41 voltage range: 50 --- 400 v current: 1.0 a 35 m ax i m u m r at i n g s an d e l e c t r i c al c h ar ac t e r i s t i c s 50 egp 10g egp 10f 300 210 egp 10a - 55 ---- + 150 a 3.thermal resistance f rom junction to ambient. i fsm i r note: 1. measured with i f =0.5a, i r =1a, i rr =0.25a. 2. measured at 1.0mhz and applied rev erse uoltage of 4.0v dc. a - 55 ---- + 150 50 30.0 400 280 400 50 100 100 70 50 15 22 1.25 0.95 5.0 100.0 dimensions in millimeters EGP10A-egp10g high efficiency rectifiers features mechanical data http://www.luguang.cn mail:lge@luguang.cn
amperes amperes reverse voltage,volts fi g. 4--typi cal reverse characteri sti cs set time base for 20/30 ns/cm fi g. 3 --typi cal forward characteri sti cs peak forward surge current 2.rise time=10ns max.source impedance=50. instantaneous forward curren t instantaneous forward voltage,volts notes:1.rise time=7ns max.input impedance=1m.22pf fi g. 1 --test ci rcui t di agram and reverse recovery ti me characteri sti c junction capacitance,pf number of cycles at 60hz amperes fi g. 6--forward derati ng curve fi g. 5--typi cal juncti on capaci tance average forward current ambient temperature, 0.375"(9.5mm)lead length 25 0 0 50 0.5 1.0 100 75 125 150 175 single phase half wave 60hz resistive or inductive load 0 1 5 10 25 20 15 30 10 100 t j =125 8.3ms single half sine-w ave EGP10A-egp10g 0 0.01 0.04 0.1 1.0 10 100 t j =25 pulse width=300 s 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 50\100\150\200v 300\400v 0.1 0 EGP10A-egp10d egp10f&egp10g 1 100 10 4 t j =25 5 15 20 25 30 35 10 -1.0a -0.25a 0 +0.5a t rr 1cm 10 n 1. 1 nonin- ductive 50 n 1. d.u.t. osci lloscope (note 1) (+) 25vdc (approx) (-) (+) pulse generator (note2) (-) EGP10A-egp10g high efficiency rectifiers ratings and charactieristic curves http://www.luguang.cn mail:lge@luguang.cn
|
